Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Pennsylvania

Driveway Cleaning for Brick in Pennsylvania

Low-pressure wash for brick. Driveway pressure washing that removes dirt, mildew, tire marks and many oil and rust stains for an even, clean finish. Typical cost $150-$400.

Driveway Cleaning for Brick is one of the jobs we do most often in Pennsylvania. Typical jobs cost $150-$400, and you approve the price before we begin. For brick, that means low-pressure wash.

The right method for the job

Low-pressure washCleaning method
Usually 500-1,500 PSI with a wide fan tip, held well back from the mortarPressure

Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.

Cleaning brick safely

Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.

Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.

How often: Every 2-3 years for most homes.

Signs you need driveway cleaning for brick

  • Dark, blotchy or striped concrete
  • Black mildew along edges and in shaded areas
  • Oil spots and tire marks
  • Rust stains from sprinklers or fertilizer
  • Weeds and moss in cracks and joints

What causes the dirt and stains

  • Vehicle drips and tire rubber
  • Dirt, pollen and leaves ground in by traffic
  • Mildew in shaded and damp spots
  • Iron in well water or fertilizer leaving rust marks

Easy upkeep between cleanings

  • Blot fresh oil with cat litter and sweep it up after a day
  • Sweep regularly so leaves don't leave tannin stains
  • Fix leaking vehicles to stop new spots
  • Avoid deicers that contain ammonium nitrate or ammonium sulfate, which damage concrete

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Stripes and swirl marks from using a wand instead of a surface cleaner
  • Etched concrete from a narrow tip held too close
  • Oily wash water running into the street and storm drains
  • Spreading oil around instead of lifting it

What happens on the day

  1. Sweep and inspect the driveway and note stains
  2. Degrease oil spots and pre-treat mildew
  3. Clean the whole surface with a rotary surface cleaner
  4. Detail edges, joints and expansion cracks
  5. Rinse, post-treat and walk the driveway with you

How much does driveway cleaning for brick cost?

$150-$400Typical range for a typical two-car driveway
1-2 hoursTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for brick

Local driveway cleaning for brick for Pennsylvania

In Pennsylvania, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.

We cover 664 cities and towns across Pennsylvania. Find driveway cleaning for brick in your city:

Driveway Cleaning for Brick: frequently asked questions

How much does driveway cleaning for brick cost in Pennsylvania?

Driveway Cleaning for Brick typically costs $150-$400 for a typical two-car driveway, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for driveway cleaning for brick?

For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.

Is driveway cleaning for brick safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule driveway cleaning for brick?

Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Pennsylvania

Exterior Mold & Mildew Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$700

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Patio Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Graffiti Removal for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $200-$800

Soft Washing for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $300-$800

House Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$700

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Pre-Paint Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$600

Pool Deck Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $200-$500

Deck Cleaning

Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards.

Typical $250-$600

Soft Washing

Low-pressure cleaning with a mild solution that kills mold, mildew and algae on siding, roofs and other delicate surfaces without damaging them.

Typical $300-$800

Efflorescence Removal

Removing white, chalky salt deposits from brick, pavers, concrete and stone.

Typical $200-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Pennsylvania. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote